7
If the device is not install the SIM card,
Press the SOS button Three seconds. The device will work
in automatic track record mode.
In this mode,
device must be installed on the SD memory card.
Please ensure that there is enough
room in the SD
card.
Device
running track will be recorded to the SD Card, The records file format is
KML. You can play the track record with Google Earth.
III.
Basic functions
（
（
（
（
Attention
：
：
：
：
The “+” in all following commands means there is a blank space here in the short
message
，
，
，
，
please do not type a real “+” character on your cell phone.
）
）
）
）
SMS is an important communicating way between a user and a device. Users could send SMS
messages through authorized mobile phones to control and monitor devices; Devices could also send
messages to the user’s authorized mobile phones, to reply to the user's instructions, report the relevant
information of the vehicles, or perform one alarm.
To explain the usage of the SMS message, this chapter will show how to use the above short message functions
one by one.
Attention : No quotation marks when sending all the SMS.
1.
Initialization
User should initialize the device before using it. This command is to set all configurations to the
default values.
Command:
Send the command SMS “begin+password” to the device, it will reply “begin ok” and
initialize all the settings to default factory settings.
Example
: Send SMS “begin123456”, it will reply “begin ok”.
（
（
（
（
Default password: 123456
）
）
）
）
2.
Change Password
User could change the default password (123456) to a new one.
Command:
Send SMS “pold pspace+new password” to the device to change
the password.
Example:
Send SMS “passwd123456 888888” to the tracker device, it will reply “password ok”
and change the password.
Attentions:
Be sure to keep the new password in mind, you have to upload the firmware to restore the
original setting in case of losing the new password.
Make sure the new password is in 6 digits Arabic numbers. Other characters are not
recognized by the device.
3.
Authorization:
Authorization phone number is a phone number you used for tracking, controlling, alarms, etc. At
most 5 phone numbers is allowed to be authorized for the tracker device. When an alarm is
triggered, the device will only sends alarm SMS to the authorized telephone numbers.
Add masters:
Add authorization as following two ways:
For the first authorization, call and track the device successfully for 10 times from a mobile
phone, the device will set this phone number as an authorized number automatically, and reply
