Chima SVP2000 User Manual Download Page 50

Page: 50 / 51

SVP2000 Business IP Phone User Manual

STEPHEN TECHNOLOGIES CO.,LIMITED

/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115

Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email: [email protected] / Url: www.stephen-tele.com

- 50 -

Echo cancellation: G.168 Compliance in LEC, additional acoustic echo cancellation(AEC) can reach 96ms max filter

length in hands-free mode

Support Voice Gain Setting, VAD, CNG

Support full duplex hands-free

SIP support SIP domain, SIP authentication(none basic, MD5), DNS name of server, Peer to Peer/ IP call

Automatically select calling line, if one line can’t be connected, the phone can automatically switch to other line to call.

DTMF Relay: support SIP info,DTMF Relay,RFC2833

SIP application: SIP Call forward/transfer

（

blind/attended)/hold/waiting/3 way talking/

Exchange /sms /pickup /joincall /redial /unredial /vport

Call control features: Flexible dial map, hotline, empty calling No. reject service, black list for reject authenticated call,

limit call, no disturb, caller ID, Flexible deer peer rule.

Support phonebook 500 records,Incoming calls / outgoing calls / missing calls. Each supports 100 records

Support conference on server.

Support IAX2

Phonebook supports vcard standard

12/24 hours time display

Support daylight saving time

Support path, gruu

Support SIP Privacy

Support SMS

Support Memo

Support WMI

Support Speed dial

Support Alarm clock

6.1.3. Network features

WAN/LAN: support bridge and router model

Support PPPoE for xDSL

Support basic NAT and NAPT

Support VLAN (optional: voice vlan/ data vlan)

NAT Penetrate, Stun Penetrate

Support DMZ

Support VPN (L2TP) function

Wan Port supports main DNS and secondary DNS server, can select dynamically to get DNS in DHCP mode or statically

set DNS address.

Support DHCP client on WAN

Support DHCP server on LAN

QoS with DiffServ

Network tools in telnet server: including ping, trace route, telnet client

6.1.4. Maintenance and management

Upgrade firmware through POST mode

Web ,telnet and keypad management

Management with different account right

LCD and WEB configuration can be modified into requested language, and support multi-language dynamically shifted

Upgrade firmware through HTTP, FTP or TFTP Telnet remote management/ upload/download setting file

Support Syslog

Summary of Contents for SVP2000




















































Search results

Summary of Contents for SVP2000

Reviews:

Related manuals for SVP2000

Brands by name

Popular brands

Chima SVP2000, User Manual

Search results

Summary of Contents for SVP2000

Reviews:

Related manuals for SVP2000

Brands by name

Popular brands