![background image](http://html1.mh-extra.com/html/chima/svp2000/svp2000_user-manual_2601718019.webp)
SVP2000 Business IP Phone User Manual
STEPHEN TECHNOLOGIES CO.,LIMITED
/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115
Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email: [email protected] / Url: www.stephen-tele.com
- 19 -
LAN IP
Specify LAN static IP.
Netmask
Specify LAN Netmask.
DHCP Service
Select the DHCP server of LAN port or not. After you modify the LAN IP address, phone will
amend and adjust the DHCP Lease Table and save the result amended automatically according
to the IP address and Netmask. You need restart the phone and the DHCP server setting will
take effect.
NAT
Select NAT or not.
Bridge Mode
Select Bridge Mode or not: If you select Bridge Mode, the phone will no longer set IP address
for LAN physical port,LAN and WAN will join in the same network. Click “Apply”, the phone will
reboot.
Notice: If you choose the bridge mode, the LAN configuration will be disabled.
4.3.2.3. Qos Config
The VOIP phone support 802.1Q/P protocol and DiffServ configuration. VLAN functionality can use different VLAN IDs by
setting signal/voice VLAN and data VLAN. The VLAN application of this phone is very flexible.
In chart 1, there is a layer 2 switch without setting VLAN. Any broadcast frame will be transmitted to the other ports except