SVP2000 Business IP Phone User Manual
STEPHEN TECHNOLOGIES CO.,LIMITED
/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115
Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email: [email protected] / Url: www.stephen-tele.com
- 21 -
Voice VLAN ID as the tag, but the data packets will not take the VLAN tag.
5) If Disable the VLAN, regardless to set the Voice/Data VLAN differentiated or not, all packets will not take the VLAN tag;
If enable the DiffServ, all packets will only take the DiffServ value.
6) One must to notice, enable the VLAN ID Check Enable that is default, If enable it, the phone will match the VLAN ID
strictly. When others' VLAN ID not match with us, the packets will discard. Contrarily, the phone will accept the
packets with the distinct VLAN ID.
7) You must gain the IP with the Static mode when you set VLAN, otherwise can't gain the IP in the VLAN and also can not
dial with point to point.
4.3.2.4. Service Port
You can set the port of telnet/HTTP/RTP by this page.
SERVICE PORT
Field name
explanation
HTTP Port
set web browse port, the default is 80 port,if you want to enhance system safety,you'd better
change it into non-80 standard port
；
Example: The IP address is 192.168.1.70. and the port value is 8090, the accessing address is
http://192.168.1.70:8090
Telnet Port
Set Telnet Port, the default is 23. You can change the value into others.
Example:
The IP address is 192.168.1.70. the telnet port value is 8023, the accessing address is telnet
192.168.1.70 8023
RTP Initial Port
Set the RTP Initial Port. It is dynamic allocation.
RTP Port Quantity
Set the maximum quantity of RTP Port, the default is 200.
Notice:
1)You need save the configuration and reboot the phone after set this page.
2)If you modify the port of Telnet and HTTP, you would better set the value more than 1024 because the port value less
than 1024 is system port reserved.
3)if you set 0 for the HTTP port, it will disable HTTP service.
4.3.2.5. DHCP SERVER
