STCS3526 Series Layer 3 Switch User Guide
- - 21 - -
Figure 5-4 Setting serial port parameters
4) Click <OK> when the serial port parameters are set and the system will enter the Hyper Terminal interface.
5.4 Booting Switch
5.4.1 Checking before Powered on
Before powering on switch, check:
Whether the power cord is correctly connected.
Whether the voltage is consistent with that required by the switch.
Whether the Console cable is correctly connected, the PC or terminal for configuration has been started, and the configuration
parameter setting is completed.
5.4.2 Powering on and Booting
After the switch is powered on, first run the BOOTROM program, and the terminal yields the following output:
