STCS3526 Series Layer 3 Switch User Guide
- - 15 - -
of some metal parts are also likely to occur. If the relative humidity is too low, the captive screw may become loose due to the
shrinking of insulating sheath. Meanwhile, the static electricity is likely to be produced in the dry weather, which may jeopardize the
CMOS circuit of the switch. The Higher the temperature is, the greater the damage to the switch will be. The reliability of the switch
will be then seriously affected and its service span will be shortened because of exposure to high-temperature environment for a
long term. The ultra-high temperature will speed up the aging process of the insulating material.
3.2.2 Laser Safety
In operating status, it is prohibited to stare into the open optical interface because the laser being transmitted through the optical
fiber will produces a small beam of light, it has very high power density and is invisible to human eyes, when a beam of light enters
the eye, retinal may be burned.
֠
֠
֠
֠
Caution:
Staring at the laser beam inside the fiber could hurt your eyes.
3.3 Installation Tools
Phillips screwdriver
Flat-blade screwdriver
ESD-preventive wrist strap
Note:
The installation tools are not shipped with Switch. Please prepare beforehand
