Assembly of this system and all connections to the buildings electrical
power system should be performed by a qualified licensed electrician
according to local and national electric codes.
CHILLED WATER
IMPORTANT NOTE*
If the V18 will be installed in a
system that performs cooling
operation at times, make sure
to thoroughly seal around the
white ABS cover and inside
the Liquidtight conduit with
silicone as a minimum
precaution.
The requirement is to prevent
air from entering the V18
inside the white ABS cover
and contacting the cold pipe
or components which could
cause condensation to form
and accumulate inside the
unit.
For higher humidity locations
you may also consider filling
the entire cavity (but not
cover the reset button) with
an electronics-grade RTV
silicone potting material rated
for this type of application.
When using a potting
material, use it only per-code
and according to the
materials instructions, make
sure to allow the material to
fully cure before attaching the
cover.
Make sure power is
disconnected before and
during this operation.
8
Summary of Contents for V18-B
Page 15: ...15 ...
