Chiltrix AC series Heating & Cooling series CX30, Installation And Operation Manual

Page: 34 / 49

Chiltrix Inc. www.Chiltrix.com
34
1. Key functions
(1) Three-colored indicator light: Green when in standby, Orange when the compressor is on,
Red when there is an error code displayed. For more details, please check the fault code
sheet at the back of this manual.
(2) Key “on/off”: power on/ power off.
(3) Key “down”: adjust the clock or set the time.
(4) Key “down”: it’s a combined key to decrease the numerical value. Continuous pressing causes a
continuous decrease. Short pressing increases the value by one.
(5) Key “up”: it’s a combined key also, but just the opposite of the down key. Continuous
pressing causes a continuous increase. Short pressing increases the value by one.
(6) Key “confirm”: confirms previous operations.
(7) Key “mode”: operational mode’s switch, it’s also a combined key.
2. Icon Meaning
UNIT OPERATION
1. Turning the unit on and off
To start the unit, press and hold the On/Off key for one second.
To stop the unit, press and hold the On/Off key for one second.
2. Mode Switch (2 modes Cooling or heating)
Under mode “standby or on”, press the M key repeatedly to cycle through the icons.
AC cooling -> heating ->
When a mode is selected, press the button to confirm, the icon will be lit solid, the
heat pump mode will be as selected.
3. Changing the Cooling/Heating parameter setting procedure
A. When in the “on” mode, the unit will operate in accordance with the factory default
temperature or last modified temperature.
B. Modification method for heating or cooling.
In the on mode, press key M key once. The current mode symbol will be
displayed.