Chigo Split Floor-Standing Air Conditioner, User Manual

Page: 8 / 15

*
USE OF REMOTE CONTROLLER
*
6
*
Above figure shows all indications for the purpose of explanation,but practically only the pertinent.
NOTE : Please check to refer the instructions for the identical remote controller of your air-conditioner.
USER'S MANUAL
Split Floor-Standing Air Conditioner
HOUR
SWING button
Press this button to select the
left/right swinging of air delivery or
to stop swinging.
SLEEP button
This button changes to SLEEP
operation,press again to cancel
the sleep operotion.
AM PM
ON/OFF
+
-
MODE
FAN SPEED
TIMER
MIN
SLEEP
SWING
HOLD
H
ON-TIMER
OFF-TIMER
Fan Speed Selection button
Press this button to select the high
speed,med-speed or low speed
of air delivery.
HOLD button
Press this button to lock or
unlock the keyboard.
Temperature Setting button
This button is used to set the room
temperature.Each pressing of the
" " or " " button,the
temperature setting is increased
or decreased by 1
0
C.
+
-
TIMER button
This button is used to set the
switch-on or switch-off time. Used
together with the "HOUR" button,
the time setting can be made
within the range of 1-12 hours,
with the interval of one hour.
Time Setting button
This button is used to set the current
time or the time for timed switch-on
of switch-off.
ON/OFF button
Press this button will start the
operations of the units.Press it once
again will stop the operations.
Air flow indicator
Signal transmitting section.
Operation Mode button
This button is used to select the
cooling,heating,or dehumidification
mode of operation.
sequence of mode switch is
cooling-dehumidification-heating.
(For the cooling-only models, the
"Heating" mode is for FAN).
Operation mode indictor
Fan speed indicator
Time indicator
Temperature indicator
Indicates the set temperature
Lock key indicator
Timed time indicator
Sleep mode indicator
LAMP button
Press this button to make the lamp
of control panel lights on or off.
LAMP
Remote controller 1