REPLACEMENT OF BATTERIES
*
When the signal from the remote controller become weak and the indoor unit can not receive it
properly;or the indications on the display screen becomes blurred,please replace with two new batteries.
*
The positive and negative poles must match the installation positions.
*
New batteries of the same type have to be used for replacement.
*
If the remote controller is not to be used for long time,take out the batteries so as to prevent the leakage
of the electrolyte from damaging the controller.
NOTE:
1. Do not use an old battery with with a new one.
2.The life of cell made in conformity to JIS or IEC is 6 to 12 moths in normal use,If it is used longer or an unspecified
cell is used,a liquid leaks from the cell,causing the remote controller inoperative.
3.Guideline of the life time is printed on the battery.The battery life may be shorter than that of air conditioner
depending on the date of manufacture,However,the battery may be alive ever after the norminal life time expired.
10
1.When the air conditioner is in the standby mode,press the TIMER button and the air conditioner will enter the timed switch-on
mode.
2.Press the HOUR button to set the needed time,The timer can make the setting in the range from 1-12 hours.
3. After the setting.the digits shown on the display screen will go down by 1 for evey elapsed hour.
Timed switch-on
Press the TIMER button again to release the mode.
Releasing procedure
USER'S MANUAL
Split Floor-Standing Air Conditioner
Summary of Contents for Split Floor-Standing Air Conditioner
Page 15: ......
