USER'S MANUAL
Split Floor-Standing Air Conditioner
PRESENT TIME SETTING PROCEDURE
Methods 1(Suitable for remote controller 1and 2)
1. When cells are inserted,under the timer operation has not been set,unload the back cover, push the "CLK" button with the tip of a
ball pen,etc.The time indicator is flickering and can set the present time.
2.Press the HOUR button to set you desired time.
3.Press the MIN button to set you desired time.
4. Press the CLK button again, then reatach the back cover.
5.In case of the abnormally use of remote controller,press the RST button
to reset the remote controller.
Operating Machine In selected modes
1. Point the remote controller at the unit,press the MODE button,select the needed mode :cooling,heating (ventilating for cooling-
only model) and dry.
2.
Press the temperature setting button to increase or decrease the readings until the needed temperature is displayed;
*
In cooling/heating operations,the temperature difference of 5
0
C between the selected temperature and the ambiend temperature
is most suitable for your health.
3. Press fan speed button to choose the air volume you want.
4. Press swing button to choose the left/right air direction you want.
9
Methods 2(Suitable for remote controller 3)
When cells are inserted,under the timer operation has not been set
1.Continually press the HOUR button about 2 seconds,the time indicator is flickering and press the HOUR button to set you desired
time.
2. Continually press the MIN button about 2 seconds,the time indicator is flickering and press the MIN button to set you desired
time.
3.Press the ON/OFF button to confirm the set time or it would automatically exit the time setting state after 15 seconds.
If when the remote controller is at abnormal state,you can take out the batteries on the back cover to clear off the display.
CLK
RST
Methods 1
TIMER OPERATION PRODEDURE
1.Duing the operation of the air conditioner,press the TIMER button and the air conditioner will enter the timed switch-off mode.
2. Press the HOUR button to set the needed time.Every the button is pressed,indication change is the following sequence:
1
*
2
*
........
*
12
*1
3.After the setting,the digits shown on the display screen will go down by 1 for every elapsed hour.
Timed switch-off
SLEEP OPERATION PROCEDURE
Use this mode to reduce operation sound when sleeping,etc.
Press the SLEEP button,the air flow sound from the indoor unit is decreased.
Press the SLEEP button again can release the mode.
and the air conditioner will be stopped automatically in 8 hours.
NOTE:
*
Use the sleep mode when you are going to bed.If this mode is used in the day,the capacity is reduced since
the ambient temperature is too high.(COOL MODE).
*
During the operation of cooling,the room temperature will be raised by 1
0
C higher than the setting after the
machine begins to operate in the sleeping mode.
*
During the operation of heating mode,the room temperature will be dropped 2
0
C lower than the setting after
the machine begins to operate in the sleeping mode.
Summary of Contents for Split Floor-Standing Air Conditioner
Page 15: ......
