background image

USER'S MANUAL

Split Floor-Standing Air Conditioner

*

METHODS OF MAINTENANCE

*

11

Make sure that the power of the air conditioner is turned off before the maintenance is to be done.

Do not place the air filter screen under the exposure of
sunlight or near an over to dry; do not use warm water
above 40

0

 C to do the cleaning so as to avoid deformation.

Power must be turned off before

doing the cleaning.

Use a piece of soft dry cloth to clear

off the dust on the units.

Do not use volatile oil, gasoline,

diluting agents or abrasive power, etc.
in doing the cleaning.

Use household neutral detergent to

clean the fingerprints or oil stains.

Do not use water to flush the units.

N.B

Cleaning

*

 Check to see if the power cable and grounding wire are

in proper state.

Check and confirm that there is any bending, or

raised ends or blockage of the drainage tubes.

Make sure that the air filter screen is properly in place

before operating the machine.

*

 Disconnect the power source

of the air conditioner.

*

 Before pulling out the power

plug, make sure that the
operation of the machine is fully
stopped.

Please use a plastic

sheet to cover the unit
to prevent dust or filth
from entering the outdoor
unit.

Prior To Operational Seasons

Air outlet
is blocked.

Air inlet is
blocked.

Make proper maintenance to the air filter screen and

other parts.

Gently pat the screen or use a vacuum
cleaner to do the cleaning. If too much
filth is accumulated on the screen, a
small amount of neutral detergent
solution can be used for the cleaning.
After the cleaning, the screen must be
dried in air and be put back into place.

Cleaning of the filter screen

Make sure that the operation of the

air conditioner is fully stopped.

Remove the fixing screws of the air-

return grids.

Pull in the direction of arrow (1) to

open the grids.

Pull in the direction of arrow (2) to

take out the air filter screen.
 (The air filter screen is loaded inside
the air-return grids).

*

*

Handle

Removal of the filter screen

After The Operational Seasons

If the machine is operated with the air filter screen removed, dust and foreign objects
will result in faulty performances of the air conditioner.

*

 Check to see if the air outlets of the indoor and outdoor

units are blocked;

*

 The protective cover of the outdoor unit must be

removed.

Summary of Contents for Split Floor-Standing Air Conditioner
















Reviews: