Installation Instructions
XCM7000
9
2.
While supporting both sides of display, lower display onto
center of ceiling mount, hooking top of interface brackets
onto front of ceiling mount. (See Figure 11)
3.
Raise the latch mechanism on both interface brackets to
lock bracket in place. (See Figure 11)
Figure 11
Adjustments
CAUTION:
Watch for pinch points! Do not place fingers
between moveable parts.
Height Adjustment and Leveling
The ceiling mounts allow up to 2 inches total adjustment.
1.
Turn the adjustment bolt in the direction necessary to level
or adjust height. (See Figure 12)
2.
Stop adjusting when the desired setting is reached.
Figure 12
Tilt
NOTE:
Two people will be required to adjust the tilt when the
display is installed.
The interface brackets allow -7.6° to 20° tilt, and can be locked
at -7.6°, -5°, 0°, 5°, 10°, 15° and 20° tilt.
1.
Adjust tilt as required. (See Figure 13)
2.
The tilt may be locked using one 1/4-20 x 2" button head
screw (V) and one 1/4-20 lock nut (W) per interface bracket.
(See Figure 13)
3.
Repeat for remaining interface bracket.
Figure 13
2
3
3
Latch
mechanism
(Array heads/display not shown for clarity)
1
Adjustment
bolts
(Display not shown)
2
(V)
10°
5°
-7.6°
-5°
Shown
locked at
0° tilt
20°
15°
(W)
3
