WM110-120-130
Installation Instructions
6
Assembly And Installation
Mounting Wall Bracket
Concrete or Concrete Block
1.
Determine mounting location on wall.
2.
Using mounting bracket (B) as a template, mark four holes
at the outer holes in bracket. (See Figure 1)
3.
Drill four 3/8" holes at marked locations in wall. (See Figure 1)
Figure 1
4.
Install four concrete anchors (H) into drilled holes. (See
Figure 2)
5.
Install four 5/16 x 2 1/2" hex head lag screws (J) through
four 5/16" washers (K), outer holes of mounting bracket (B)
and into concrete anchors (H). (See Figure 2)
Figure 2
Wood Studs
1.
Determine mounting location on wall. Use a stud finder to
locate studs.
2.
Draw a dotted line down the center of the stud to be used
for mounting.
3.
Line up inner three holes on mounting bracket (B) with
center of stud at desired mounting location. (See Figure 3)
4.
Using mounting bracket (B) as a template, mark three holes
at the inner three holes in bracket. (See Figure 3)
5.
Drill three 7/32" holes at marked locations in wall. (See
Figure 3)
Figure 3
2
3
X4
X4
(front view)
(B)
(J) x 4
5
(K) x 4
(H) x 4
4
(B)
(front view)
(B)
wood stud
4
5
X3
X3
