WM110-120-130
Installation Instructions
14
4.
Install two 1/4-20 x 1/2" button head security screws (Q)
through holes in stop bracket and into holes in sliding nuts.
(See Figure 30)
Figure 30
5.
(Optional) Remove projector from short throw projector
mount according to projector interface instructions.
NOTE:
For most projectors, it will be necessary to remove
projector prior to install four security screws to projector
bracket. For ease of installation, it is recommended to
remove projector prior to performing the following
steps.
6.
Remove one of four bolts from adapter plate. (See Figure 31)
7.
Install one 1/4-20 x 3/4" button head security screw (R) into
hole vacated by removing bolt in Step 6 and into plastic
spacer. (See Figure 32)
8.
Repeat Steps 6-7 for remaining three bolts one bolt at a
time.
WARNING:
It is important to replace adapter plate bolts
ONE AT A TIME or adapter plate could fall from mount during
installation!
Figure 31
Figure 32
9.
Reinstall projector according to interface instructions.
4
(Q) x 2
stop bracket
sliding nuts
adapter plate
6
x 4 (one at a time)
plastic spacer
adapter plate
(R) x 4 (one at a time)
7
