WM110-120-130
Installation Instructions
12
NOTE:
In most cases, cable management covers will NOT
need to be removed in order to route cables from
projector to the wall mount. But for some thick cables,
removing the covers may be necessary.
3.
Remove cable management covers (if necessary) from
short throw projector arm. (See Figure 23)
Figure 23
4.
Route projector cable(s) under mount cover and through
short throw projector arm tunnel.(See Figure 25)
5.
(Optional)Cables can be tied to inside of projector’s front
cover using cable ties (not included). Route cables near
front cover and wrap cable tie through slots on front cover
and around cables. (See Figure 24)
Figure 24
(bottom view)
small cable cover
large cable cover
3
3
projector (example)
around cables
cable tie (not included)
route through slots and
4
Figure 25
(bottom view)
cable (example)
4
4
projector (example)
