Service Manual
SL220-SK2
7
6.
Secure the outlet box attachment plate to the SL220 using
one 8-32 x 1" Phillips head screw (previously removed).
Figure 17
7.
Slide front channels of previously removed projector cradle
forward onto the SL220 bearings. (See Figure 18)
Figure 18
8.
Line up rear spacers with attachment holes on SL220 arms.
(See Figure 19)
9.
Tighten rear spacers.
Figure 19
10. Reconnect grounding strap from inside front of SL220 to
projector cradle, using the Phillips head screw previously
removed. (See Figure 20)
Figure 20
11. Plug in SL220 and verify proper operation.
12. Re-install projector and cabling, using cable tie mounts and
cable ties, as required.
13. Test and adjust projector, as required.
14. Return removed motor assembly to Chief Manufacturing.
6
x 1
4
5
x 4
3
Corner
Hook
4
7
Front of
Front Channels
SL220
x 2
9
Rear of
SL220
x 1
10
