Service Manual
SL220-SK2
3
REMOVE SL220
1.
Remove projector and cabling.
2.
Unplug lift
and save
cord.
3.
Remove
and save
Phillips head screw and disconnect the
grounding strap leading from inside front of SL220 to
projector cradle. (See Figure 1)
Figure 1
4.
Loosen the screws in the linkage on each side of projector
cradle at rear of SL220. (See Figure 2)
Figure 2
5.
Gently pull projector cradle away from sides at rear of
SL220. (See Figure 3)
6.
The forward/aft adjustment screws may need to be
loosened for this. If so, loosen the screws, but do NOT
remove the screws. (See Figure 2)
Figure 3
7.
While still pulling the projector cradle away from the sides of
the SL220, slide front channels towards back, off of
bearings and remove projector cradle from SL220. (See
Figure 4)
IMPORTANT ! :
Save projector cradle for re-use.
Figure 4
x 1
3
Grounding strap
x 2
4
Front of SL220
Adjustment
Adjustment
screws
screws
5
Front of SL220
5
7
Rear of
SL220
Front
Channels
