Instruction Manual
Plasma Presenters Cart
5
REMOVING DISPLAY FROM MOUNT
1.
Remove bolt or padlock from faceplate (if used).
NOTE: The pin may have been used as a more permanent
locking device. If so, remove nut and pin and move
from the lower holes to the upper holes.
2.
Pull back on flag on upper mounting hole and press pin
down into "Open" position. (See Figure 9)
WARNING: DISPLAY MAY WEIGH IN EXCESS OF 40 LBS!
Always use two people and proper lifting techniques when
installing or positioning display on mount.
3.
Carefully lift display from mount.
4. Lift up on pin and place flag back against faceplate to
return it to “Closed” position.
2
1
Remove bolt
or padlock
if used
Pin in
"Open"
position -
Pin in
"Closed"
position -
4
move to
"Open"
position to
move to
"Closed"
position
remove
display
after display
is removed.
Figure 9.
