Product Name:
Garden Polyresin Fountain Oasis with Planters
SKU #:
WHF545
Instruction Manual
Please save this manual for future reference.
Thank you for purchasing this Winsome House product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.
CARTON CONTENTS:
Description
Accessories standards and type
Quantity
01
Fountain Base
1
02
Fountain Top
1
03
Pump
JEBAO WP-450
1
04
Screw
2
05
Planter
2
Tools required for assembly:
xxx
Assembly Instructions:
1.
Unpack the contents of the box and check to make sure that all items are accounted for and in good
condition.
2.
Select a flat, level surface for the assembly and final location of your fountain.
3.
Place the fountain on a flat, level surface. From the opening at the back of the fountain, insert the water
supply tube into the pump outlet. Lead the pump power cord out through the cord slot at the back opening.
4.
Align and insert the peg on the underside of the fountain top to the notch of pedestal, tighten the screw
then place the fountain top on the basin (Fig.2)
5.
Place the pump upright in the basin and draw the pump power cord out of the opening. (Fig. 3)
6.
Add clean water into the basin. The water level should be approximately 25mm lower than the edge of the
basin.
7.
Connect the pump to a GFCI outlet and the product will begin to function as intended. (Fig. 4)
8.
To eliminate the possibility of water damage around your fountain, check for leaks and excessive splashing
after the initial setup of your fountain. It is highly recommended that this fountain be placed in an area
where it cannot be damaged.
9.
Do not leave your fountain running for extended periods of time when no one is present to observe the
performance.
10.
Please refresh the fountain with water each week to ensure it in good condition.
11.
Do not add any harmful chemicals to the water as it may alter the paint finish.
