4
Instruction Manual
Plasma Presenters Cart
MOUNT PLASMA DISPLAY ON CART
1.
Install PSB bracket (not included) on plasma display
according to instructions supplied with bracket.
WARNING: Do not attempt to hang the plasma display onto
the cart with one person.
2.
With the cart rolled up against a stable vertical sur-
face, make sure the casters are locked.
3.
While supporting both sides of display, align four mounting
buttons on display or interface bracket with four mounting
holes in head assembly. (See Figures 7 and 8)
Figure 7
WARNING: DISPLAY MAY WEIGH IN EXCESS OF 40 LBS!
Always use two people and proper lifting techniques when
installing or positioning display on stand.
4.
Lower display into place listening for audible "click" to
ensure recessed area of mounting buttons are properly
seated in lower area of mounting holes.
(See Figures 7 and 8)
WARNING: IMPROPER INSTALLATION CAN LEAD TO
DISPLAY FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! Ensure mounting
buttons are completely engaged in mounting holes.
NOTE: Holes are provided in the faceplate for use with a
padlock or similar locking device, if desired. In
addition, the pin and nut may be removed from
the upper holes and moved to the lower holes for
use as a more permanent locking device. (See
Figure 8)
3
Figure 8.
Remove pin
and nut and
move to lower holes
A padlock or bolt may
be placed through latch
holes
4
5
