Installation Instructions
PAC253
5
ASSEMBLY
Assembling CPU Accessory
Attaching Locking Flag
1.
Attach locking flag (C) to faceplate (B) using one
10-24 x 1/2" Phillips undercut machine screw (H), one
spacer (M), and one 10-24 Nylock lock nut (L).
(See Figure 1)
NOTE:
The locking flag may be installed in one of two
locations, dependent upon the display mounting
pattern. (See Figure 1)
Figure 1
Attaching Mounting Buttons
1.
Attach four mounting buttons (D) to CPU holder (A) using
four 10-24 x 1/2" flat head cap screws (J). (See Figure 2)
Figure 2
Placing CPU in CPU Holder
1.
Put hook and loop tabs (F) together so there are 3 squares
of hook and loop.
2.
Remove paper from one side of each of the three hook and
loop squares.
3.
Attach hook and loop squares to the CPU. (See Figure 3)
Figure 3
4.
Remove paper from hook and loop squares, and press the
CPU against the CPU holder (A).
Locking flag may be
installed in either
location noted.
1
(H) x 1
(C)
(M)
(L)
(B)
1
(J) x 4
(D) x 4
(A)
3
(F) x 3
4
CPU
(A)
