4
Instruction Manual
PAC-300
3.
Install the speaker mount end supports (40) on the
speaker mount cross support (10) and secure each
speaker mount end support using four flat washers (140)
and four 1/4-20X1/2” hex head cap screws (150) (see
Figure 5 and Figure 6).
4.
Install the latching flag (60) using the 10-24X1/2” Phillips
undercut screw (70), Nylon spacer (80) and 10-24 Nylock
nut (90) (see Figure 7).
5.
Install the thumb screw knobs (130) (see Figure 8).
Figure 7. Install Latching Flag
10-24 Nylock Nut
Nylon Spacer
Latching Flag
10-24X1/2” Phillips Undercut Screw
Figure 8. Install Thumb Screw Knobs
Attach thumb screw knobs in
one of these two holes (both sides)
depending upon screen size
Figure 6. Speaker Mount End Support Attachment
1/4-20X1/2” Hex Head
Cap Screw
Flat Washer
Figure 5. Speaker Mount End Supports
Speaker Mount End Support
