Instruction Manual
PAC-300
7
Speaker Mounting
1.
Loosen (Do not remove) four 1/4-20X1/2” hex head cap
screws (150) securing speaker mount end support (40)
on each side of mount (see Figure 13)
2.
Extend speaker mount end supports (40) to facilitate
speaker attachment.
3.
Place each speaker, with mounting bracket attached, at
desired height on mount, align mounting holes, and
secure using four 1/4-20X1/2” hex head cap
screws (150).
4.
Slide speaker mount end supports (40) to accommodate
the desired position and secure in place by tightening
1/4-20X1/2” hex head cap screws (150).
Figure 14. Speaker Mounting and Adjustment
Mounting Bolts
Adjustment Bolts
Adjust speaker mount end supports
Figure 13. Speaker End Support Adjustment