Instruction Manual
PAC-300
3
ASSEMBLE MOUNT
NOTE:
Numbers in ( ) refer to parts shown
in Figure 1.
Assemble mount as follows:
1.
Attach two mounting buttons (100) to left speaker mount
button support (20) and right speaker mount button sup-
port (30) using four 10-24X7/8” button head cap
screws (110) and four Nylock nuts (90) (see Figure 1,
Figure 2 and Figure 3).
2.
Install left speaker mount button support (20) and right
speaker mount button support (30) on speaker mount
cross support (10) and secure using four 1/4-20X1/2” hex
head cap screws (150) (see Figure 4). NOTE: Installing
screws on top first makes installing screws in slotted
holes on bottom last is easier.
Figure 2. Mounting Button Location
Figure 4. Button Supports to Cross Support
Mounting Buttons
Button Support
Figure 3. Mounting Button Attachment
Mounting Button
Button Support
10-24X7/8”
Button Head
Cap Screw
10-24
Nylock
Nut
Cross Support
Button Support
Install Top1/4-20X1/2” Hex Head Cap Screws First
Cap Screws Last
Install Bottom
1/4-20X1/2” Hex Head
