MULTICUTTER MC40
4
MODEL:
The model of the machine
EN 60974-10:2003
International standards.
SN
Machine Serial Number which must appear on requests or inquiries concerning the machine.
Single-phase transformer-rectifier
1-50/60Hz
Single-phase input supply at 50 or 60 Hz.
Uo
Secondary no-load voltage (peak value).
X
Duty-Cycle Percentage
The duty-cycle is the number of minutes, expressed as a percentage, the machine can
operate (arc on) within a ten minute period without overheating. The duty cycle varies
according to the output current.
I2
Output cutting current
I1
Input Amps absorbed corresponding to different output levels (
I2
).
U2
Secondary voltage with cutting current
I2.
U1
Nominal supply voltage
IP21
Machine case protection class. The 1 in the second digit place means that this unit is not fit
to work outdoors in the rain.
F
Insulation Class
MODEL:
