Installation Instructions
MSP-TEQ9
9
2.
After whiteboard and complete upright assembly is in place,
loosen three knobs on each side of assembly and raise/
lower adjustable legs so that fastener holes in lower
whiteboard hanger bracket (Z) match up with mounting
holes in lower tabs of whiteboard. (See Figure 9)
3.
Tighten all knobs. (See Figure 9)
4.
Fasten bottom of whiteboard to lower whiteboard hanger
bracket (Z) using two M6 x 12mm Phillips screws (AA)
through tabs at bottom of whiteboard into front of
whiteboard hanger bracket (Z). (See Figure 9)
Figure 9
2
2
3
x 6
2
(AA) x 2
(Z)
(view behind
whiteboard)
4
whiteboard
tabs
