Installation Instructions
KRA243
3
TOOLS / PARTS FOR INSTALLATION
A (1)
[KRA243 faceplate]
1/8" (included)
C (4)
B (4)
D (4)
E (1)
G (1)
1/8"
F (1)
M4x10mm
M4x20mm
M10x5.3x10
#10-32 x 3/8"
M4 x 4mm
ASSEMBLY AND INSTALLATION
Mounting to K1 Mounts
1.
Refer to K1 Series Installation Instructions to use hardware
B-D to mount display(s) to faceplate(s) (A).
2.
Position display with faceplate (A) attached above mount.
(See Figure 1)
3.
Slide faceplate (A) onto mounting head until quick release
tab clicks into place. (See Figure 1)
Figure 1
Rotational Adjustment
NOTE:
(Optional) Rotational adjustment may be locked by
installing rotational locking screw (F) into back of
faceplate. (See Figure 2)
Figure 2
4.
The monitor may be adjusted 90 degrees in either direction
in order to provide a portrait view of the monitor. (See Figure
2)
5.
Use Phillips screwdriver to adjust rotational adjustment
screw to adjust rotational tension. (See Figure 2)
Display Removal Security Screw
NOTE:
In order to prevent display from being easily removed
from mount using the quick release lever, install
M4x4mm security screw (F) into lower hole on back of
faceplate. (See Figure 3)
Figure 3
3
(F)
5
(F)
