This manual is intended for the users of the DA-FM1500 ceiling mounting
bracket. It includes the instructions for mounting the DA-FM1500 ceiling
mounting bracket to the ceiling.
•
This bracket is intended to be used with some models of dome
cameras. Ask your retailer for details on a specific model and do
not use it with other models of cameras.
•
This installation should be performed by a qualified service
personnel in conformance to all local codes.
•
You may need to reinforce the ceiling. If the ceiling is not strong
enough to support the camera, the camera may fall.
•
Do not use this product for other purposes.
Mounting
1
Assemble the camera body to the bracket by
tightening the screws.
•
DC-D3233WRX / DC-D3233RX / DC-D3233X Models:
Screw No. 5 (3-point), PCB Support 8.8mm
•
DC-D4233WRX / DC-D4233HRX / DC-D4223WRX
Models: Screw No. 5 (3-point), PCB Support 8.8mm
6ea
•
DC-D4233RX / DC-D4223RX Models: Screw No. 4
(2-point), PCB Support 8.8mm 4ea
•
TC-D4222WRX / TC-D4221WRXP Model: Screw
No.6(2-point), No PCB support necessary
•
TC-D4222RX / TC-D4221RXP Model: Screw NO.6(2-
point), PCB support 8.8mm
•
Other Plastic Dome Models: Screw No. 2 (3-point), No
PCB support necessary
•
Other Vandal Dome Models: Screw No. 1 (3-point),
No PCB support necessary
< Screw No. >
(DC-D4233RX Model)
*When using the screws of DC-D4233RX / DC-D4223RX /
DC-D4233WRX / DC-D4233HRX / DC-D4223WRX models,
combine the two as shown below.
2
Connect the cable through the cable hole
and screw the safety wire to the bracket to
prevent the bracket from falling on to the
floor.
Cable
Safety Wire
DA-FM1500 INSTALLATION MANUAL
