Installation Instructions
K1W/K1S Series
11
4.
Using 5/32” hex key (N), turn adjustment screw clockwise to
lower mounting plate until it is able to easily slide into wall
track. (See Figure 3)
5.
Using 5/32” hex key (N), turn adjustment screw counter-
clockwise to raise lower mounting plate until bracket is fully
secured to slat wall. (See Figure 3)
Figure 3
K1S220
1.
Verify mounting brackets on OFBU bracket can move freely.
(See Figure 4)
Figure 4
2.
Locate desired installation location and slide upper
mounting plate into wall making sure bracket is seated in
channel bottom. (See Figure 5)
3.
Let lower mounting plate rest against wall.
4.
Using 1/2” socket, tighten tension hex head bolt until lower
mounting plate slides into channel in wall and continue
tightening until resistance is felt. (See Figure 5)
Figure 5
5.
Tighten two upper and lower button head cap screws to
secure OFBU bracket to wall. (See Figure 6)
Figure 6
IMPORTANT ! :
If the display being installed has a recessed
mounting surface, the display must be assembled to the mount
prior to mount installation. See
Display Installation
in this
document before proceeding.
4
5
adjustment screw
(arm not shown
for clarity)
x4
OFBU bracket
1
(arm not shown
for clarity)
2
3
4
OFBU bracket
4
(arm not shown
for clarity)
OFBU bracket
x4
OFBU bracket
5
5
(arm not shown
for clarity)
