Installation Instructions
JHS210/ JHSV
5
Attach Display to Mount
1.
Start two Phillips pan head screws into top mounting holes
on VESA plate (R). (See Figure 4)
2.
Align two screws in VESA plate (R) with upper mounting
holes in Centris cup and lower display until screws are
seated in lower area of teardrop mounting holes.
(See Figure 4)
Figure 4
3.
Hold display so that display back is against Centris cup and
install two Phillips pan head machine screws (C,D, or E)
through lower mounting holes in Centris cup and into lower
mounting holes in VESA plate (R). (See Figure 5)
Figure 5
4.
Route cables and wires to display.
3
(C) x 4
2
(R) x 1
3
(R) x 1
(C) x 4
JHSV Display Installation
Figure 6
400mm
100mm
300mm
200mm
200mm
