Installation Instructions
FWD-111
7
Install FWD-111 on Wall Bracket
1.
Install the FWD-111 on the wall bracket by placing the top
of the FWD-111 over the top of the wall bracket and push-
ing the bottom of the FWD-111 over the bottom of the
wall bracket (see Figure 5).
2.
Using the 5/32” hex wrench (160), secure the FWD-111 to
the wall bracket by tightening the set screw (see Figure 6).
NOTE: Refer to the “INTRODUCTION” on page 3 to deter-
mine the correct procedure to mount your display
using the applicable VESA mounting-hole pattern
configuration.
Set screw
Figure 5. Install FWD-111 on Wall Bracket
Figure 6. Tighten Setscrew to Secure
