Installation Instructions
FWD-111
9
200mm/100mm Pattern
To mount the display using the 200mm x 100mm mounting
hole pattern, do the following:
1.
Attach interface bracket (70) to the display using six
M4 x 12mm flat head screws (80). See Figure 10.
2.
Start two M4 x 5mm Phillips pan head screws (90) into the
top two mounting holes of the display (see Figure 11).
3.
Hang the mount from the two screws started in Step 2.
4.
Install the remaining two M4 x 5mm Phillips pan head
screws (90) into the bottom two mounting holes of the dis-
play.
5.
Secure the display to the mount by tightening all four
M4 x 5mm Phillips pan head screws (90).
6.
Proceed to “CABLE MANAGEMENT” on page 10 and
the “ADJUSTMENTS” on page 10 and perform those two
procedures to complete the installation process.
Installing Non-VESA Compliant Mounts
1.
For custom interface brackets, contact:
Chief Manufacturing.
80
70
Figure 10. Install 200mm/100mm Pattern
90
Figure 11. Hang Display onto Mount
