FCA810/811
Installation Instructions
14
Installing to FCA623 Accessory
NOTE:
Steps 6-10 only apply if installing to FCA623
accessory.
6.
Use two 1/4-20 x 7/16” button head cap screws (R), two
large washers (H) and two 1/2” spacers (U) to secure shelf
bracket (C) to main bracket (B). (See Figure 22)
7.
Slide main bracket (B) onto front of cart mount head
assembly until shelf bracket (C) rests on top of head
assembly. (See Figure 22)
Figure 22
8.
Slide second shelf bracket (C) underneath head assembly,
lining up holes on shelf bracket (C) to holes on main bracket
(B). (See Figure 23)
9.
Slide two 1/2” spacers (U) in between shelf bracket (C) and
main bracket (B). (See Figure 23)
10. Use two 1/4-20 x 1/2” button head cap screws (R) and two
large washers (H) to secure shelf bracket (C) to main
bracket (B). (See Figure 23)
Figure 23
NOTE:
Refer to Table 4 and dimension drawings on pages 3-
6 to determine the extension level based on extension
distance from mount center.
Table 4: Above Cart/Ceiling
11. (For
maximum/intermediate extension
) Use two #10-24
lock nuts (G) to secure upright bracket (A) to main bracket
(B) and adapter plate (V). (See Figure 24)
NOTE:
Maximum configuration is shown below. Several
intermediate configurations are possible depending on
which holes are used.
12. (For
maximum/intermediate extension)
Use 1/4-20 x 5/8”
hex head flange bolt (N) and center washer (F) to secure
upright bracket (A) to main bracket (B). (See Figure 24)
Figure 24
13. (For
minimum extension)
Slide upright bracket (A) behind
main bracket (B). (See Figure 25)
14. (For
minimum extension)
Use 1/4-20 x 5/8” hex head
flange bolt (N) and center washer (F) to secure upright
bracket (A) to main bracket (B). (See Figure 25)
Figure 25
(R) x 2
(H) x 2
6
(B)
7
(Above cart with FCA accessory)
(C)
(rear view)
(U) x 2
(R) x 2
10
(H) x 2
(C)
8
(B)
(Above cart with
(rear view)
FCA623 accessory)
(U) x 2
9
Extension distance from center of mount (in.)
18.0 - 19.4
Minimum
19.4 - 27.6
Intermediate
27.6 - 30.8
Maximum
(G) x 2
11
(B)
(A)
(N)
12
(Above cart/ceiling
(V)
(F)
holes to use
for intermediate
configurations
(rear view)
- maximum)
(N)
14
13
13
(Above cart/ceiling - minimum)
(rear view)
(F)
(B)
(A)
