Installation Instructions
FCA810/811
13
NOTE:
Refer to Table 3 and dimension drawings on pages 3-
6 to determine the extension level based on extension
distance from mount center.
Table 3: Above Wall Mount
5.
(For
maximum extension
) Use #10-32 x 3/8” button head
cap screw (P) and small washer (J) to secure adapter plate
(V) to main bracket (B). (See Figure 18)
6.
(For
maximum extension
) Use two #10-24 lock nuts (G) to
secure upright bracket (A) to main bracket (B) and adapter
plate (V). (See Figure 18)
Figure 18
7.
(For
minimum/intermediate extension
) Use two #10-24
lock nuts (G) to secure upright bracket (A) to main bracket
(B) and adapter plate (V). (See Figure 19)
8.
(For
minimum/intermediate extension)
Use 1/4-20 x 5/8”
hex head flange bolt (N) and center washer (F) to secure
upright bracket (A) to main bracket (B). (See Figure 19)
NOTE:
Minimum configuration is shown below. Several
intermediate configurations are possible depending on
which holes are used.
Figure 19
Attaching Shelf to Cart/Ceiling Mount
IMPORTANT ! :
If installing to a 2x1 display cart using
the FCA623 accessory, proceed to “Installing to FCA623
Accessory” Section (Step 6).
1.
Use two 1/4-20 x 1/4” button head cap screws (M) and two
large washers (H) to secure shelf bracket (C) to main
bracket (B). (See Figure 20)
2.
Slide main bracket (B) onto front of cart/ceiling mount head
assembly until shelf bracket (C) rests on top of head
assembly. (See Figure 20)
Figure 20
3.
Slide second shelf bracket (C) underneath head assembly,
lining up holes on shelf bracket (C) to holes on main bracket
(B). (See Figure 21)
4.
Use two 1/4-20 x 1/4” button head cap screws (M) and two
large washers (H) to secure shelf bracket (C) to main
bracket (B). (See Figure 21)
Figure 21
5.
Proceed to Step 11.
Extension distance from center of mount (in.)
17.8 - 19.5
Minimum
19.5 - 29.4
Intermediate
29.4 - 30.8
Maximum
(V)
(J)
(A)
(B)
(G) x 2
6
(P)
(Above wall -
5
(FCA811 shown)
maximum)
(G) x 2
7
(V)
(F)
(A)
(B)
(N)
8
(Above wall - minimum)
(FCA811 shown)
holes to use
for intermediate
configurations
(M) x 2
(H) x 2
1
(B)
2
(Above cart/ceiling - Standard)
(C)
(rear view)
(M) x 2
4
(H) x 2
(C)
3
(B)
(Above cart/ceiling - Standard)
(rear view)
