Installation Instructions
FCA810/811
15
Height Adjustment
1.
Loosen hardware used to attach main bracket (B) to upright
bracket (A). (See Figure 26)
2.
Adjust shelf height as desired. (See Figure 26)
NOTE:
For all above display installations, it is recommended
that the shelf be positioned so that it rests on top of
display to help ensure an even mount.
3.
Tighten hardware used to attached main bracket (B) to
upright bracket (A). (See Figure 26)
Figure 26
Installing Camera (not included)
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the weight mounted on
the FCA810/811 shelf does not exceed 10 lbs (4.5 kg).
WARNING:
Camera must be secured to FCA810/811 shelf
using either adhesive hook and loop squares (T) or screws
(Q or W)! Failure to securely mount camera to shelf may
result in serious personal injury or damage to equipment!
NOTE:
OPTIONAL
: Slots are provided in shelf for strap (not
included) to hold camera in place. (See Figure 27)
Using Adhesive Squares
1.
Use up to eight adhesive hook and loop squares (T) to
secure camera to shelf. Attach adhesive squares to bottom
of camera first and then attach corresponding squares to
shelf when the exact mounting location has been
determined.
Using Screw(s)
NOTE:
Screw mounting options will vary based upon camera
model.
2.
(Single Screw option) Install 1/4-20 x 3/8” Phillips pan
machine screw (Q) through mounting slot on shelf and into
hole on bottom of camera. (See Figure 27)
3.
(Multiple screw option - FCA811 only) Install four #4-48 x
1/4” Phillips pan machine screws (W) through outside
mounting slots and into holes on bottom of camera. (See
Figure 28)
4.
Route cable from camera towards back of shelf and down
behind the FCA810/811. (See Figure 27) and (See Figure
28)
Figure 27
Figure 28
2
1
3
(Above Cart/Ceiling
shown as example)
(FCA810 shown)
Slots provided
for strap
(not included)
2
(Q) x 1
Camera
(example -
4
not included)
1
(T) x 4
(FCA811 only)
Slots provided
for strap
(not included)
3
(W) x 4
Camera
(example -
4
not included)
