35
34
Cleaning and Maintenance
This product requires regular maintenance. The cleaning and maintenance of
the stroller must only be carried out by an adult.
CLEANING
Please refer to the care label for instructions on cleaning the fabric parts of
the stroller.
Periodically wipe clean plastic parts with a soft damp cloth. Always dry the
metal parts to prevent the formation of rust if the stroller has come into
contact with water.
MAINTENANCE
Lubricate the moving parts only if necessary, with a light application of a
silicone based lubricant. Periodically check the condition of the wheels, and
keep them clean of dust and sand. To avoid friction that may prevent the
correct operation of the stroller, ensure that all the movable plastic parts
placed along the metal frame are clean of dust, dirt or sand. Keep the stroller
in a dry place. Prolonged exposure to direct sunlight may cause the fabric to
fade.
How to Re-attach the Canopy Fabric
Cómo volver a sujetar la tela de la capota
23A. To attach the Canopy Fabric,
slide the bow through the front
Canopy Sleeve, as shown. Make
sure the dimple on the bow is
facing up when sliding bow
through the Sleeve.
23A. Para sujetar la tela de la
capota, deslice el arco por la
manga de la parte delantera de la
capota, tal como se muestra.
Cuando deslice el arco por la
manga, asegúrese de que la
depresión en el arco esté hacia
arriba.
Dimple
Depresión
23B. Slide the wire bow through
the back Canopy sleeve, as
shown. Make sure the wire bend
on the bow is facing down when
sliding bow through the sleeve, as
shown.
To re-attach the canopy clip
repeat steps 21 thru 22 in
REVERSE.
23B. Deslice el arco de alambre a
través de la manga trasera de la
capota, tal como se muestra.
Cuando deslice el arco por la
manga, asegúrese de que la
curvatura de alambre en el arco
esté orientada hacia abajo.
Para volver a sujetar la presilla de
la capota, repita los pasos 21 y 22,
A LA INVERSA.
23
B
23
A
Wire Bend
Curvatura
del alambre
Summary of Contents for Mini Bravo
Page 20: ...www chiccousa com...
