Chicco 06626, Instructions For Use Manual, Page: 42 / 268

42 43
Reduc-
tion of
the op-
erating
area
- Presence of obstacles,
metal structures, reinforced
concrete walls, etc. inter-
posed between the Baby
unit (transmitter) and
the parent unit (receiver)-
- Baby unit Alkaline bat-
teries and/or parent unit
lithium-ion battery almost
flat.
- Move units closer together or relocate
the units themselves in order to reduce
the number of obstacles, metal struc-
tures, reinforced concrete walls, etc.
interposed between them.
- Replace in the Baby unit Alkaline bat-
teries and/or charge lithium-ion battery
in the parent unit.
Electro-
static
or elec-
tromag-
netic
noise
Electro-static or electro-
magnetic interference due
to electrostatic or electro-
magnetic fields emitted
by other electrical equip-
ment: e.g. domestic appli-
ances, cellular or cordless
phones, etc.
Identify and, if possible, eliminate the
cause of interference.
Pres-
ence of
hissing
or whis-
tling
- Units are too close to-
gether.
- Parent unit (receiver)
volume too high.
- More units further apart.
- Lower parent unit (receiver) volume,
pressing
the volume adjustment button -(5b).
The
parent
unit (re-
ceiver)
emitting
weak
sounds
- The baby is too far away
from the Baby unit (trans-
mitter).
- Parent unit volume level
too low.
- Move the Baby unit (transmitter) within
1-1.5m away from the child.
- Increase the volume level on the parent
unit pressing
the + volume adjustment button (5a).
DECLARATION OF CONFORMITY:
Mod. 06626
Artsana S.p.A. hereby declares that this product is in conformity with the essential
requirements and the related dispositions established by directive 1999/5/CE. A
copy of Declaration of Conformity with European Directive 1999/5/EC is available
at: www.chicco.com - Products Section. According to European Commission
decision N ° 2000/299/EC of 06/04/2000, the frequency band used by this
product is harmonised in all EU countries; therefore, this is a class 1 product and
can be freely used in all countries of the European Community.