Chicco 06626, Instructions For Use Manual, Page: 29 / 268

28 29
ing of the infrared radiation emission
along the axis by the naked eye or by
optical devices.
ATTENTION!
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE PRO-
TECTION OR ATTEMPT TO OPEN MAINS
ADAPTERS. DO NOT WET MAINS
ADAPTERS, THE Baby unit OR PARENT
UNIT. DO NOT EXPOSE TO HUMIDITY
OR ATTEMPT TO OPEN THEM. THIS MAY
BE A SOURCE OF DANGER AND SHALL
VOID THE WARRANTY.
1.Configuration & Features
This monitoring device, created with
“Adaptive frequency Hopping” digi-
tal transmission technology, can be
used as an aid in baby monitoring in
the home. This baby monitor includes
a Baby unit (primarily in transmitter
mode of images and sounds) and a
parent unit (primarily in receiver mode
of images and sounds).
Both these devices use “Adaptive fre-
quency Hopping” digital transmission
technology to establish a radio con-
nection that allows the sending and
receiving of sounds and images.
1.1 System features
Main system features include:
• Visual and voice transmission via
“Adaptive frequency Hopping” digital
technology system.
• Outdoor operating range of about
150 metres without obstacles.*
* The maximum operating range is
about 150 metres in an open field with
no obstacles and with fully charged
batteries (the range, however, could
be reduced substantially within a
home, depending on particular en-
vironmental conditions, layout of
walls and furniture in the home and
the presence of metallic structures,
external and internal interference/
electromagnetic fields, concrete walls
or between rooms on different floors
or because batteries are not fully
charged, etc.).
1.2Baby unit (primarily in transmit-
ter mode of images and sounds)
Model 06626
1. Power via 100-240V~, 50/60Hz
/6.5V , 550mA mains switching
adapter or via 4 1.5V AA /LR6 Alkaline
batteries (not included).
2. On/Off button
3. Night light On/Off button
4. Nightlight
5. Camera lens
6. Microphone
7. Infrared lighting system (8 LEDs) to
allow viewing of the baby in the dark
8. Light-sensitive sensor
9. Power and link indicator light:
(a) Steady green: linked with parent
unit
(b) Flashing green: absence of or loss
of link with parent unit
(c) OFF: Baby unit off
10. Alkaline battery compartment
closing panel
11. Baby unit power connector
12. Alkaline battery status indicator
light:
(a) Flashing red: Alkaline batteries
almost flat
(b) OFF: Alkaline batteries charged or
operation via mains adapter (1)