14
15
en
Be careful not to get burnt when opening the lid
and/or removing the container!!
In the event there is no water or it runs out, the ap-
pliance MAY stop working and emit three acoustic signals.
In this case
appears on the screen and the red light
switches on.
“CREam” function
This function is for preparing: custard, pudding, white sauce,
etc. It is recommended to apply the mixing paddle (L).
Set the cooking time according to the recipe by operating the
“+ and -” buttons.
If one does not wish to set the cooking time the display shows
the incremental time (maximum 30 minutes).
Press the start/stop (8) button to start the function. Place the
knob (9) in the slow mixing position (1-3) (fig.4).
The end of cooking is signalled via the message on the
display and by an acoustic signal.
To remove the container (F) at the end of each function
switch off the appliance via the appropriate button
and remove the lid (B).
Be careful not to get burnt when opening the lid
and/or removing the container!!
In the event there is no water or it runs out, the ap-
pliance MAY stop working and emit three acoustic signals.
In this case
appears on the screen and the red light
switches on.
Nota Bene
• By placing the knob on position “0”, the blades stop.
• If the “START/STOP” (8) button is not pressed within 2 mi
-
nutes from the setting, the appliance goes into stand-by.
• The appliance is equipped with a loading opening (C), use
-
ful for pouring seasoning without opening the lid.
STEam COOKING FUNCTION
The steam cooking function allows to cook food, preserving
the proteins and vitamins contained.
Proceed as follows:
• Pour water into the container (F) until reaching the steam
(300ml) level marked inside the same container (fig. 8) and
insert it in its place.
• Insert the steam cooking basket (E) (fig. 9) into the contai
-
ner with the food to be cooked.
• Put on the lid and close it by turning it clockwise until it
clicks into place (fig. 1).
• Press the I/0 main switch (H).
•
Press the steam button (3). By default the display shows 0:00.
If one wishes to set the cooking time press the “+ and -” but
-
tons.
If one does not wish to set the cooking time the display shows
the incremental time (maximum 30 minutes).
• Press the “START/STOP” (8) button to start steam cooking
(fig. 10).
The numbers on the display flash until boiling point is
reached (approximately 100°C). A triple acoustic signal is
emitted when it reaches 100°C.
The countdown time or incremental time starts on the di-
splay.
The elapsed set time is signalled by the message
on the display and by an acoustic signal. The steam cooking
process is complete.
To remove the container (F) at the end of each function
switch off the appliance via the appropriate button
and remove the lid (B).
Be careful not to get burnt when opening the lid
and/or removing the container!!
In the event there is no water or it runs out, the applian-
ce MAY stop working and emit three acoustic signals. In this
case
appears on the screen and the red light
switches on.
