12
13
en
ters and extension leads that comply with current safety
standards, taking care not to exceed the power limit indi-
cated on the adapter and/or extension lead.
• Do not place the appliance near or above hot surfaces,
gas cookers, hot plates, delicate surfaces.
• The models equipped with earthing must be connected
to an efficient earthing unit as required by the electrical
safety standards in force.
NEVER IMMERSE the base of the appliance in water. The con
-
tainer, lid and accessories can be washed in the dishwasher.
The materials and items intended for contact with food
comply with the requirements of European Regulation
1935/2004.
Recommendations for the correct disposal of the
product in compliance with European Directive
2002/96/CE.
The product must not be disposed of as urban waste at
the end of its working life. It must be taken to appropriate local
authority separate waste collection centres or to dealers providing
this service. Disposing of a household appliance separately avoids
possible negative consequences for the environment and health
deriving from unsuitable disposal and allows to recover the ma-
terials of which it is made in order to make significant savings of
energy and resources. The product has the crossed-out wheeled
bin mark as a reminder of the obligation to dispose of household
appliances separately. The illegal disposal of the product by the
user entails the application of administrative sanctions envisio-
ned by the Standard in force.
aPPlIaNCE DESCRIPTION aND CONTROlS PaNEl
a
Stopper
B
Lid
C
Loading opening
D
Lid handle
E
Steam cooking basket
F
Container
G
Appliance base
H
Main switch
I
Multi-function blade (for mincing/blending)
l
Mixing paddle
m
Blade protection
N
Spatula
1.
DISPLAY
2.
TRADITIONAL COOKING BUTTON
3.
STEAM COOKING BUTTON
4.
BOIL BUTTON
5.
Time in BUTTON
6.
Time decrease - BUTTON
7.
MODE BUTTON (selects the cooking mode:
, , , - WARM, MILK, CREAM)
8.
“START/STOP” BUTTON
9.
Blade speed selection KNOB
BEFORE USE
• Before using the appliance for the first time, thoroughly
wash all the accessories, paying attention to the blades
(they are sharp), wipe a damp cloth over the base of the
appliance.
• Place the appliance on a dry and level surface. Do not
connect the appliance to a power socket until the acces-
sories have been properly installed.
Check the mains voltage corresponds to the indication on
the appliance plate then plug into the power socket.
• Should it be particularly hard to turn the cover when clo
-
sing it, dampen the seal with some water
• Should it be particularly hard to turn the cover when clo
-
sing it, dampen the seal with some water.
SwITCHING ON THE aPPlIaNCE
Nota Bene :
•
Before inserting the plug into the power socket, ensure that
the main switch (H), placed on the side of appliance, is on
0
.
• Press the I/0 main switch.
• Upon activation, the three function switches light up and
then switch off and the display shows fixed “-- --“ dashes.
INSTRUCTIONS FOR USE
Nota Bene:
• To move from one function to another, simply press the
button relative to the desired function.
• To switch to the blender function, press the button relative
to the currently active function again, then press the START
/ STOP (8) button.
• With any function active, by pressing the START/STOP (8)
button once, the appliance stops (PAUSE); by pressing the
button again, the appliance resumes operation.
By pressing and holding the START/STOP (8) for about 2 se
-
conds, the appliance cancels the currently active function.
• If the lid is opened whilst a function is active the appliance
goes into STAND-BY and the message appears.
To resume operation close the lid again.
appliance description
