Chicago Gaming GalacTix, Service Manual

Page: 6 / 50

6
4. Connecting the Fins
To protect the fins from warping during shipment, two fins are not attached to the
cabinet. Both fins connect to the
Door Hinges .
REQUIRES 1 PERSON
The two fin assemblies connect to the two
Door
Hinges . Locate the bag of fasteners labeled Fins .
This bag includes (2) 6-32 x 1/2” Self-Tapping
Screws , (2) 6-32 x 5/8” Self-Tapping Screws , (2) 6-
32 x 7/8” Self-Tapping Screws , and (2) 6-32 x 1”
Self-Tapping Screws .
Open one of the doors to the cabinet. Hold the
Fin
Assembly in place on the Door Hinge . Use a 6-32 x
1/2" Self-Tapping Screw to attach it through the top
hole of the fin bracket. Use the 5/8” screw through
the second hole, the 7/8” through the third, and the 1”
screw in the bottom hole. Repeat this on the other
Door Hinge to connect the other Fin Assembly .
2 x