background image

SKU 95596        

 For technical questions, please call 1-800-444-3353 

PAGE 11

lImITEd 90 dAY WARRANTY

Harbor Freight Tools Co. makes ev-

ery effort to assure that its products meet 

high quality and durability standards, and 

warrants to the original purchaser that this 

product is free from defects in materials 

and workmanship for the period of 90 days 

from the date of purchase. This warranty 

does not apply to damage due directly or 

indirectly, to misuse, abuse, negligence or 

accidents, repairs or alterations outside 

our facilities, criminal activity, improper in-

stallation, normal wear and tear, or to lack 

of maintenance. We shall in no event be 

liable for death, injuries to persons or prop-

erty, or for incidental, contingent, special 

or consequential damages arising from the 

use of our product. Some states do not al-

low the exclusion or limitation of incidental 

or consequential damages, so the above 

limitation of exclusion may not apply to 

you.

 THIS WARRAnTy IS ExPRESSLy In 

LIEU Of ALL OTHER WARRAnTIES, Ex

-

PRESS OR IMPLIED, InCLUDInG THE 

WARRAnTIES Of MERCHAnTABILITy 

AND FITNESS.

To take advantage of this warranty, 

the product or part must be returned to us 

with transportation charges prepaid. Proof 

of purchase date and an explanation of the 

complaint must accompany the merchan-

dise. If our inspection verifies the defect, 

we will either repair or replace the product 

at our election or we may elect to refund 

the purchase price if we cannot readily 

and quickly provide you with a replace-

ment. We will return repaired products at 

our expense, but if we determine there is 

no defect, or that the defect resulted from 

causes not within the scope of our warran-

ty, then you must bear the cost of returning 

the product.

This warranty gives you specific 

legal rights and you may also have other 

rights which vary from state to state.

3491 Mission Oaks Blvd.  •  PO Box 

6009  •  Camarillo, CA 93011  •  (800) 

444-3353

REV 08g

Summary of Contents for Power Systems 95596












Reviews: