SKU 99823
For technical questions, please call 1-800-444-3353.
Page 10
troubleshooting
problem
possible causes
likely solutions
Electric Sharpener will
not start
No power at outlet.
1.
Cord not connected.
2.
Check power at outlet.
1.
Check that cord is plugged in.
2.
Grinding Wheel not
running smoothly
Grinding Wheel may not be true due
3.
to wear during use.
Check Grinding Wheel for smooth,
4.
straight edge and replace if
necessary.
Follow all safety precautions whenever diagnosing or servicing the
tool. disconnect power supply before service.
please read the FolloWing careFully
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/
OR DISTRIBUTOR ExPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.
record product’s serial number here:
note:
If product has no serial number, record month and year of purchase instead.
note:
Some parts are listed and shown for illustration purposes only, and are not
available individually as replacement parts.
inspection and
Maintenance
to preVent
serious injury
FroM accidental
operation or electric
shock:
Before inspection or
maintenance, make sure the
switch is turned off, and the
cord is unplugged.
to preVent serious
injury FroM Failure:
do not use if damaged. if
abnormal noise or vibration
occurs, have the problem
corrected before further use.
BeFore each use,
inspect the
general condition of the Electric
Sharpener. Check for loose screws,
misalignment or binding of moving
parts, cracked or broken parts,
damaged electrical wiring, and any
other condition that may affect its
safe operation.
