SKU 99823
For technical questions, please call 1-800-444-3353.
Page 4
This product is not a toy. Keep it out
6.
of reach of children when children are
not being closely supervised.
People with pacemakers should
7.
consult their physician(s) before
use. Electromagnetic fields in close
proximity to heart pacemaker could
cause pacemaker interference or
pacemaker failure.
WARNING: The brass components
8.
of this product contain lead, a
chemical known to the State of
California to cause birth defects (or
other reproductive harm). (California
Health & Safety code § 25249.5, et
seq.)
WARNING: Handling the cord on
9.
this product will expose you to lead,
a chemical known to the State of
California to cause cancer, and
birth defects or other reproductive
harm. Wash hands after handling.
(California Health & Safety Code §
25249.5,
et seq.
)
The warnings, precautions, and
10.
instructions discussed in this
instruction manual cannot cover all
possible conditions and situations
that may occur. It must be understood
by the operator that common sense
and caution are factors which cannot
be built into this product, but must be
supplied by the operator.
Specific Safety Rules
grinding wheel Must Be rated to
1.
at least 4800 rpM.
Wear ansi-approved safety
2.
goggles and heavy-duty work
gloves during set up and use.
Knives with serrated edges are a
3.
good example of blades that may not
be suited for this Electric Sharpener.
This Multi-purpose Electric Sharpener
4.
is not recommended for professional
applications.
saVe these
instructions.
speciFications
Electrical
Requirements
120 V~ / 60 Hz / 70 W
Cord Length
6’ L
Speed
4800 RPM
Switch
Rocker Type ON/OFF
Applications
Drill Bits: 1/8” ~ 3/8”
(3~10mm)
Chisels/Planer Blades:
1/4” ~ 2” W
Most Knives and Scissors.
Minimum size drill bit 1/8”
unpacking
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
REV 08k
