Page 4
SKU 96692
for technical questions, please call 1-800-444-3353.
If damaged, have the Worklight repaired before use.
Many accidents are
caused by poorly maintained tools.
Use the tool in accordance with these instructions and in the manner intended
for this particular type of tool, taking into account the working conditions and
the work to be performed.
Use of this Worklight for operations different from
those intended could result in a hazardous situation.
service
Have your Twin Head Worklight serviced by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the tool is
maintained
.
specific safetY rules
to prevent serious injury:
Wear ANSI-approved safety goggles during setup.
Risk of electric shock! Inspect before use; do not use if parts are loose or insula-
tions are damaged.
Use only on flat, level surfaces.
Be aware that this Worklight gets hot when in use. Allow to cool before touching
and keep this Worklight away from children.
Maintain labels and nameplates on the tool. These carry important safety infor-
mation. If unreadable or missing, contact Harbor Freight Tools for a replacement.
Do not leave the Worklight unattended when it is plugged into an electrical outlet.
Turn off the Worklight, and unplug it from its electrical outlet before leaving.
The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
saVe these instructions.
grounding
improperly connecting the grounding wire can result in
electric shock.
Check with a qualified electrician if you are in doubt as to
whether the outlet is properly grounded. do not modify
the power cord plug provided with the tool. never remove
d.
4.
a.
1.
2.
3.
4.
.
6.
7.
warning
warning
