Page 9
SKU 96692
for technical questions, please call 1-800-444-3353.
Use one, or both Fluorescent Lamps depending on how much illumination is
needed for your project.
When finished, turn Switch(s) off and let the Worklight cool before storing.
To prevent accidents, turn off the tool and disconnect its power supply after use.
Clean, then store the tool indoors out of children’s reach.
Maintenance and serVicing
risk of serious personal injury from electric shock. turn the
switch of the tool to its “off” position and unplug the tool
from its electrical outlet before performing any inspection,
maintenance, or cleaning procedures.
damaged equipment can fail, causing serious personal
injury. do not use damaged equipment. if anything
abnormal occurs, have the problem corrected before further
use.
cleaning, maintenance, and lubrication
Before each use,
inspect the general condition of the tool. Check for loose
screws, misalignment of parts, cracked or broken parts, damaged electrical wir-
ing, and any other condition that may affect its safe operation.
after use,
clean external surfaces of the tool with clean, moist cloth.
warning! if the supply cord of this power tool is damaged, it must be
replaced only by a qualified service technician.
troubleshooting
problem
possible causes
probable solutions
Worklight will not turn
on.
No power at outlet.
Cord not connected.
1.
2.
Check power at outlet.
Check that cord is plugged in.
1.
2.
Burnt Lamp.
3.
Replace Lamp.
3.
7.
8.
9.
1.
2.
3.
warning
warning
