SKU 92476 For technical questions, please call 1-800-444-3353.
PAGE 5
information. If unreadable or missing, contact Harbor Freight Tools for a replace-
ment.
3.
To avoid electrical shock, never use the Power System in the rain. Never
allow water or other liquids to leak inside the Body, Outlets, or Light Lens of the
Power System.
4.
Do not pull or carry the Power System by its 120 VAC Adapter Cord or
12 VDC Cigarette Lighter Plug Cord, or pull the cords around sharp corners
or edges. Keep the cords away from heated surfaces.
5.
Avoid unintentional starting. Make sure you are prepared to begin work
before turning on the Power Switch of the Power System.
6.
Do not stand on the Power System. Standing on the Power System may cause
it to tip, resulting in personal injury and/or product damage.
7.
Never leave the Power System unattended when its Power Switch is left in
the “ON” position. Make sure the Power Switch is in its “OFF” position before
leaving.
8.
Make sure to read and understand all instructions and safety precautions
as outlined in the manufacturer’s manual for the products for which the
Power System will power.
9.
Never attempt to use the Power System to jump start a vehicle.
10.
Make sure to turn off the Power Switch of the product to be powered before
making cable connections.
11.
Replace Fuses on the Power System only with those of identical rating.
12.
For best performance, do not use more than one Output at a time, not to
exceed 10 AMPs for the 12 VDC Output or 1 AMP for the 3 VDC, 6 VDC, or
9 VDC Outlets.
13.
Do not expose the Power System to extreme heat or cold.
14.
Use the Power System only to power those devices whose voltage match
those of this unit.
15.
Avoid working alone. If an accident occurs, an assistant can bring help.
16.
WARNING! Lead acid batteries generate hydrogen gas during normal
operation, and even more gas is generated when the battery is charging. Hydro-
