SKU 92476 For technical questions, please call 1-800-444-3353.
PAGE 10
INSPECTION, MAINTENANCE, AND CLEANING
1.
WARNING! Before performing any inspection, maintenance, or cleaning
procedures, make sure the Power Switch (2) is in its “OFF” position. Such
preventive safety measures reduce the risk of starting the equipment acciden-
tally.
2.
Before each use: Inspect the general condition of the Power System. Check for
misalignment or binding of moving parts, cracked or broken parts, leaking Bat-
tery, damaged electrical cables, and any other condition that may affect its safe
operation. If a problem occurs, have the problem corrected before further use.
Do not use damaged equipment.
3.
To replace the 3 VDC, 6 VDC, 9 VDC Output Fuse (8): The
type of Fuse is 1
AMP, Glass. To replace, unscrew and remove the Fuse Cap. Then, remove the
old Fuse. Install a new Fuse, and replace the Fuse Cap. (See Figure A.)
4.
To replace the 12 VDC Output Fuse (11): The
type of Fuse is 10 AMP, Push-
In, Plastic. To replace, pull the old Fuse out of its receptacle, and insert a new
Fuse in its receptacle. (See Figure A.)
5.
To replace the 12 VDC Cigarette Lighter Plug Fuse (13): The
type of Fuse is
5 AMP, Glass. To replace, unscrew and remove the Cap (14). Then, remove the
old Fuse. Install a new Fuse, and replace the Cap. (See Figure A.)
8.
CAUTION! All maintenance, service, or repairs not listed in this
manual are only to be attempted by a qualified service technician.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
