SKU 91995
For technical questions, please call 1-800-444-3353.
Page 4
or other part that is damaged should
be properly repaired or replaced.
DIRECTION OF FEED. Feed work
20.
into a blade or cutter against the
direction of rotation of the blade or
cutter only.
NEVER LEAVE TOOL RUNNING
21.
UNATTENDED. TURN POWER OFF.
Don’t leave tool until it comes to a
complete stop.
gROUNDINg INSTRUCTIONS
TO PREVENT
ElECTRIC SHOCk
AND DEATH FROM
INCORRECT gROUNDINg
WIRE CONNECTION
READ AND FOllOW THESE
INSTRUCTIONS:
110-120 V~ grounded Tools: Tools
with Three Prong Plugs
In the event of a malfunction or
1.
breakdown, grounding provides a
path of least resistance for electric
current to reduce the risk of electric
shock. This tool is equipped with an
electric cord having an equipment-
grounding conductor and a ground-
ing plug. The plug must be plugged
into a matching outlet that is properly
installed and grounded in accordance
with all local codes and ordinances.
Do not modify the plug provided – if it
2.
will not fit the outlet, have the proper
outlet installed by a qualified electri
-
cian.
Improper connection of the equip-
3.
ment-grounding conductor can re-
sult in a risk of electric shock. The
conductor with insulation having an
outer surface that is green with or
without yellow stripes is the equip-
ment-grounding conductor. If repair
or replacement of the electric cord or
plug is necessary, do not connect the
equipment-grounding conductor to a
live terminal.
Check with a qualified electrician or
4.
service personnel if the grounding
instructions are not completely under-
stood, or if in doubt as to whether the
tool is properly grounded.
Use only 3-wire extension cords that
5.
have 3-prong grounding plugs and
3-pole receptacles that accept the
tool’s plug.
Repair or replace damaged or worn
6.
cord immediately.
125 V~ 3-Prong Plug and Outlet
(for up to 125 V~ and up to 15 A)
grounding
Pin
This tool is intended for use on a cir-
7.
cuit that has an outlet that looks like
the one illustrated above in
125 V~
3-Prong Plug and Outlet
. The tool
has a grounding plug that looks like
the plug illustrated above in
125 V~
3-Prong Plug and Outlet
.
The outlet must be properly installed
8.
and grounded in accordance with all
codes and ordinances.
REV 09d
